Crocodile Liquid Floor Hard Plus

Liquid floor hardener

  • Protecting and hardening existing concrete surface
  • Anti-dust
  • Suitable for both old and new concrete. Exterior and interior uses

Packing : 

5 Liters / Pail

20 Liters / Pail

Crocodile Liquid Floor Hard Plus Liquid floor hardener. It contains hybrid silicate. It designed to use for protecting and hardening existing concrete surface to enhance strength, anti-dust, protection against water and dirt. It is ready to use. It can use for old and new concrete. Suitable for exterior and interior uses for all type of concrete floor area such as factory, warehouse, car service, car parking, office and other concrete floor area.

Liquid floor hardener. It contains hybrid silicate. It designed to use for protecting and hardening existing concrete surface to enhance strength, anti-dust, protection against water and dirt. It is ready to use. It can use for old and new concrete. Suitable for exterior and interior uses for all type of concrete floor area such as factory, warehouse, car service, car parking, office and other concrete floor area.

Application Instruction
Substrate Preparation

The substrate must be dry, clean, no dirt, no dust, without any oil and other impurity. If the substrate present algae, mold and fungi, it is recommended to do a thorough cleaning, eliminating in its entirety and with specific products for this propose. If the substrate present non absorption, it is recommended to polish by buffing machine with roughness sheet for better absorption of surface.

Application method
Polishing

Apply 2-3 coats without dilution. Polishing by buffing machine with fineness sheet. Leave the film dry 2 hours between coat. Applied area could be walked or have light traffic after 24 hours and with heavy traffic after 1 week.
Coating
Apply 2-3 coats without dilution. Leave the film dry 2 hours between coat. Allow it penetrates in to substrate and remove the excess by clean fabric. Applied area could be walked or have light traffic after 24 hours and with heavy traffic after 1 week.

Estimated Coverage
3-5 sq.m / liter. It depends on the type and condition of the substrate. The exact consumption must be determined by the means of a sampling of the work.

Tools
1. Apply by brush or roller
2. Spray

Tool cleaning
Clean tools after use by water.

Suggestion
• In case apply on new cement substrate. It must be left to dry at least 14 days.
• Do not recommended to apply excess to avoid white stain.
• Do not apply on surfaces in constant contact with water or moisture.
• In case of rain, let the substrate dry before applying.

Caution
• Recommend to use rubber glove, dust masks, eye glass and personal safety equipment.
• Apply with good ventilation. Do not inhale product.
• In case of contact with eyes, rinse immediately with water and seek medical advice.
• Keep away from children.