Crocodile Roof Shield

How To Use

Substrate Preparation

• Clean the surface to be free from dust, grease, concrete scrap or unknown matter etc.
• Fill cracks if any on the surface with suitable repairing material. Fill wall border or joints with sealant.
• Leave the surface dry for at least 3 hours after cleaning.
• New concrete surface must be at least 28 days
• New rendered surface must be at least 7 days.
• Substrates must also be perfectly dry.

Application

• Stir thoroughly before use.
• For rough or porous surfaces, dilute Jorakay Roof Shield with 5–10% water and apply as a primer coat.
• Apply evenly using a brush or roller.
• Allow the first coat to dry for 4 hours before applying the second coat in a perpendicular direction.
• If reinforcement is needed, embed fiberglass mesh between the first and second coats while the first coat is still wet. Apply the second coat immediately to fully cover the mesh.
• After application, protect the surface for at least 48 hours.

Estimated Coverage

1 kg / sq.m. (thickness 0.2-0.4 mm)

Primer : approx. 0.5 kg / sq.m. (dilute 5-10% of water)

Limitation            

• Substrate on the rooftop should have proper slope to prevent water accumulation.
• It is not recommended for use in areas of water immersion and do not use where negative hydrostatic pressure is evident.

Caution 

• Temperature range for use: 10-35 ˚C
• Wash thoroughly after handling.
• Keep out of reach of children

Storage 

• It should be kept in a dry place and the temperature is not too high to avoid product degradation.
• Shelf life for 1 year since manufactured date.