Cement Barrier Paint

Cement-Based Coating for Concrete

Product Features
• High opacity film effectively covering surface imperfections and minor cracks.
• Water-based paint, easy to use in just one step, efficient and cost-saving.
• Durable in weather conditions, including humidity and UV resistance.
• Preventing fungal, algae and waterborne stains.
• No smell of volatile substances (Zero VOCs). Safe for health.

Color Shade : 5 Shades
Application Area
• Suitable for concrete surfaces, concrete barriers, plaster and porous surfaces.

Packing

• Pack size: 20 kg/set Includes
- Part A : Cement Powder 5kg/bag x 2 bags
- Part B : Liquid 5 kg/bag x 2 bags

Order Jorakay products

SEE JORAKAY Cement Barrier Paint is a water-based cement paint formulated with protective coating agents to resist stains. It is specifically designed for coating concrete surfaces or concreate barriers. The film offers high opacity, effectively covering surface imperfections and minor cracks, it also contains hydrophobic substances that reduce water absorption, helping to prevent fungal, algae and water stains. This product has high moisture vapor permeability, reduces color peeling and blistering. It is durable in weather conditions, UV resistance and moisture resistance. The application processes are easy to use. Suitable for exterior use.

Application Instruction

Substrate Preparation
New surfaces

  • Surfaces should be clean and dry out at least 28 days. Moisture should not be over 14% (measured by a Protimeter).
  • If the surface has cracks not smooth, recommended to repair cracks or plastering the surface before painting with putty material or suitable surface finishing putty.
  • The surface to be painted must be clean, free from dust, loose particles, old paint remnants, and stains.
  • If applying over existing paint, remove the deteriorated paint film completely, clean the surface, and use primer for old concrete before painting.

Old surfaces

  • The surface to be painted must be dry, free from dust, loose particles, old paint remnants, and stains.
  • Remove the original paint and deteriorated surfaces. if there is dust that cannot be removed completely. Should use a primer
  • For areas with fungal, algae or water stains, clean with a mold and mildew remover, such as Crocodile M-Kill, and allow the surface to dry for 3-4 hours.

Application

  • Apply 2 coats of SEE JORAKAY Cement Barrier Paint, allowing at least 30 minutes between coats.
  • Protect the surface from water for at least 24 hours after painting.

Consumption rate

  • 2-2.2 Square meter/ Kilogram (2 layers)


Tools
• Brush, trowel and plastic trowel.


Tools cleaning
• Clean tools after use with clean water.


Recommendation

  • Uneven color may result from mixing ratio variations or application methods.
  • Do not mix with other types of paints.
  • White stains may appear on dark color due to concrete wall conditions.
  • Surfaces should be clean and dry out at least 28 days. The surface is ready for painting
  • For Surface exposed to direct sunlight, heat and moisture allow to become slightly damp before application.
  • In case of rain, let the substrate dry before applying. To make the color stick firmly and look beautiful

Caution

  • It is recommended to wear safety equipment, such as gloves, dust masks, safety glasses or other safety equipment.
  • In the event of eye contact, rinse your eyes with clean water several times immediately and seek medical advice promptly.
  • Keep out of reach of children.

Storage

  • Keep in a cool, dry area with a range temperature of 0-35oC.
  • The shelf life of the product, if not open for use, can be kept for at least 1 year from the production date.
File Download Requirements: For optimal system performance and stability, the total file size for each download session is limited to 50 MB.
If the selected files exceed this limit, the system will be unable to proceed with the download.
0.23 MB

Please fill in all required fields (*)