GrafClean Premium

Acrylic Paint for Interior and Exterior, Matte Finishing.

Product Features

  • No smell of volatile substances (Zero VOCs) and without carcinogens (Formaldehyde). Safe for health.
  • No pungent smell or disturbing odor while working. Fast setting, ready to move in 24 hours after application. Suitable for new and renovated buildings.
  • Good adhesion to the surface with high flexibility. Well, conceal small cracks with the innovative technology of graphene.
  • Breathable, reduce color peeling and bulging.
  • No primer is required because of an alkaline property that bonds well with the cement surface. (*In cases of dusty surfaces, mold, water stains, or uneven absorption, it is advisable to use a primer to prepare the surface before applying the topcoat).
  • High density to conceal the surface well, no need to apply repeatedly. Save time and budget.
  • Prevents mold and algae.
  • The color is smooth, natural look. Not reflecting light, beauty, and eyes comfort.
  • Variety of colors.
  • 10 Years protection warranty

Color Shade : 980 shades for interior and 322 shades for exterior.

Certificates : Cradle to Cradle Silver, French VOC A+, TISI.285

Products can be used to increase points in certification of green building standards such as LEED WELL TREES


Pack size : 15 L, 3.75 L, 0.75 L

Order Jorakay products

GrafClean Premium is an ecological paint with graphene technology and a matte finish. It is ideal for decorating facades and interiors that require regular cleaning. Also, to obtain high demand for intense colors and high finishing requirements. Suitable for both interior and exterior use, whether for new construction or renovations.

Application Instruction

Substrate Preparation

Old Surfaces

  • The surface must be clean, and free of dust, loose particles, old paint remnants, and stains.
  • Scrub or scrape off the old paint and any deteriorated surface areas to remove all dust (do not use wire brushes). If dust persists, use a primer for old cement.
  • For areas with mold or water stains, clean with a mold and mildew remover, such as Crocodile M-Kill, and allow the surface to dry for 1-2 days.
  • For cracks with a width of less than 1 millimeter and non-continuous cracks, fill them with Crocodile Wall Putty.
  • For cracks wider than 1 millimeter or continuous cracks, use Crocodile Acrylic Seal Plus to fill and seal the cracks.

New Surface

  • The surface should have moisture content not exceeding 15% (measured with a Protimeter).
  • If there are cracks or unevenness on the surface, it is recommended to repair the cracks or apply surface preparation before painting, using suitable patching material.
  • The surface to be painted must be free of dust, loose particles, old paint remnants, and stains.

Product Preparation

  • Mix 10-15% water by weight. (Water quantity of 100-150 milliliters per liter of product) Mix into a homogeneous one.

Application Method

  • Apply 2 or 3 coats evenly in a V shape. Paint in sections starting with the borders. For the remaining area, apply by roller. Allow to dry for 2-4 hours before applying the second coat.


  • In conditions of 27ºC ±2% and 65% ±5% relative humidity: 2-4 hours between layers and 24 hours drying.


  • 5-6 m2/l (2 coats). It depends on the type and condition of the substrate. The actual coverage rate will be obtained from the average value of the actual work performed.


  • Paintbrush, paint roller, airless, or other applicable equipment.

Tool Cleaning

  • Clean tools after use with warm water.

Additional Information

  • The mineral substrate must be at least 28 days old.
  • Do not apply the product on surfaces immersed in water or areas with high humidity, such as bathrooms or swimming pools.
  • In case of rain, wait for the surface to dry before applying the paint.
  • Avoid cleaning or scrubbing the surface after painting. After application, protect it from water for at least 4 days.


  • It is recommended to wear safety equipment, such as gloves, dust masks, and safety glasses.
  • In the event of eye contact, rinse your eyes with clean water several times immediately and seek medical advice promptly.
  • Keep out of reach of children.


  • Store in tightly sealed packaging in a dry place, away from cold air, and avoid exposure to direct sunlight in the storage area.
  • The shelf life of the product, if not opened for use, can be kept for at least 1 year from the production date.