Crocodile Admix Mold-O

Crocodile  Admix Mold-O is a ready to use, low viscosity oil base release agent for all type of Concrete formwork. It is a light amber liquid that will not stain. It reacts with cement paste at interface of the concrete and formwork to reduce a thin layer coating of film enabling quick, clean and easy striking of formwork. It’s suitable for all type of formwork (Steel, Plastic, woods or aluminum) and concrete construction.

Crocodile  Admix Mold-O is a ready to use, low viscosity oil base release agent for all type of Concrete formwork. It is a light amber liquid that will not stain. It reacts with cement paste at interface of the concrete and formwork to reduce a thin layer coating of film enabling quick, clean and easy striking of formwork. It’s suitable for all type of formwork (Steel, Plastic, woods or aluminum) and concrete construction.

Application
Surfaces of formwork should be clean and free from oil grease or any contaminant. Apply by a low pressure spray, sponge mop, roller or brush before erecting the formwork. Concrete can be place soon after application of Crocodile Admix Mold-O.

Estimated Coverage
The coverage of Crocodile Admix Mold-O will vary depending on the type of formwork and its surface condition. For wood formwork, 1 liter per 20-60 sq.m. For steel and plastic formwork, 1 liter per 35-60 sq.m.

Limitation
Do not add water to the product.

Caution

• Do not inhale
• For spray application, work in well-ventilated area
• Should be used with the protection equipment such as gloves, dust mark and glasses.
• If contact with skin or eyes, clean it with water. If irritation, immediately see a doctor Keep out of reach of children

Storage
It should be kept in a dry place and the temperature is not too high to avoid product’s degradation. Use within 1 year from the date of manufacturing