TH
จระเข้ ไบโอซิดอล วอช | Crocodile Biocidal Wash

Crocodile Biocidal Wash

Anti-Fungus/Algae Biocide Solution

Product Features

  • Kill fungus, algae, and bacteria infested substrates
  • Water-based. Safe for users
  • Can be painted over
  • Suitable for both interior and exterior applications.

Suitable Surface

Concrete, plaster cement, gypsum, cement and masonry surface, fiberglass, mirror, metal, wood, and other materials (it is highly recommended to test the product on a small surface area before actual full implementation).

Color: Clear

Store Finder
Order Jorakay products
@jorakayfamily
02-7201112

Crocodile Biocidal Wash is a water-based anti-microbial treatment solution designed to treat and kill fungus, algae, and bacteria infested substrates prior to painting without scrubbing especially in inaccessible area. It is effective against the most common micro-organisms and biofilms found on surfaces. When properly used, it will enable the decoration of treated surfaces to be carried out with minimal risk of re-infection from the old surface, concrete, masonry, natural stone, wooden or wide variety of substrates. The area after applied and leaving a residual ingredient will slowly weather off over a few days, leaving a clean and refreshed surface. It could be used for both interior and exterior applications.

Application Instruction

Substrate Preparation

  • Scrape off, brush or use high-pressure water jet to remove any heavy built-up dirt, mold, and algae before treatment
  • For best results apply onto a dry substrate
  • Do not apply in wet weather. In case of rain during the drying period, reapply the solution.
  • Never use this product in the presence of hypochlorite solution

Application Instruction

Substrate Preparation

  • Scrape off, brush or use high-pressure water jet to remove any heavy built-up dirt, mold, and algae before treatment
  • For best results apply onto a dry substrate
  • Do not apply in wet weather. In case of rain during the drying period, reapply the solution.
  • Never use this product in the presence of hypochlorite solution

Application

Shake container before use. Apply brush or roller to affected areas. Leave it dry at least 3-4 hours before applying paint or topcoat.

Estimated Coverage

140-160 sq.m./unit (20 liters)/coat. Depending on the absorbency of the surface

Tool

Brush or roller

Tool Cleaning

Clean tools after use by water.

Suggestion

  • The product is suitable for wall work or any material in vertical alignment.
  • For new concrete, it should be left to fully dry for at least 28 days.
  • Do not apply on surfaces in constant contact with water or moisture.
  • In case of rain, let the substrate dry before applying.

Caution

  • Recommend using rubber gloves, dust masks, eye glass and personal safety equipment.
  • Apply with good ventilation. Do not inhale product.
  • In case of contact with eyes, rinse immediately with water and seek medical advice.
  • Keep away from children.

Storage

The shelf life is approximately 1 year if stored off ground in original, sealed containers and keep away from direct sunlight.