Crocodile 9102 W

Application Instruction

Substrate Preparation

• Surfaces should be clean from dust, dirt, oils, grease, curing compounds, other coatings, efflorescence, and laitance before applying Crocodile 9102 W. New concrete should be allowed to cure for at least 28 days before applying Crocodile 9102 W. Substrate moisture level below 4% promotes penetration of product.
• It can be applied by brush, roller, or spray. Apply the product in two coats.
• If the product is used to impregnate porous substrates, we recommend diluting with water of 50% for the priming.
• The second coat may be applied after the first coat dry for 1-3 hours (depending on temperature).
• Treated surfaces should be protected from contamination for 24 hours.
• Surfaces treated with Crocodile 9102 W should be cleaned as soon as they have been exposed to contaminant. Paint is very difficult to remove once it has completely cured.

Estimated Coverage

1 liter per 8 -10 sq.m. (2 coats) Depending on type and condition of substrate.

Caution

• Should not work in areas with high concentration acids
• Containers should be closed after each use.
• Should wear personal protective equipment (PPE) while handling chemicals.
• Keep out of reach of children.

Storage

• Should be stored in a dry place and under shade at 5-30 degrees Celsius (should not be exposed to direct sunlight).
• The shelf life of the product, if not opened for use, can be kept for at least 1 year from the production date.
• Avoid storing in places or cabinets made of iron.
• In case the product exceeds its expiration date, quality testing should be conducted before use.