Crocodile Adhesive Nail

High Performance Construction Adhesive

  • Unique user friendly, highly pseudo-plasticity and non-runny characteristic making it truly easy to use on vertical wall and ceiling
  • Gap filling because of its higher solid content and especially it is highly pseudo-plasticity (soft, smooth, non-sagging) property
  • Flexible but tough for use around home and in construction
  • Board application for most timber based, cementitious substrate, ceramic and most common metallic construction products
  • Paintable when dried

Standard : ASTM C661, ASTM D412, ASTM C794, ASTM C679
Color : Beige
Packing : 
Net Weight : 300 ml.

Store Finder JORAKAY CORPORATION map

Information

Crocodile Adhesive Nail is made of tough elastomeric rubber like, tackifying resin and light hydrocarbon solvent. It is very low in odour and free of aromatic solvent for use indoor and outdoor. It offers excellent bond strength, flexibility, good temperature resistance and good slump resistance. Crocodile Adhesive Nail can be used in most common construction materials. The substrates are timber, plywood, MDF, particle board, hard board, plaster board, cementitious fibrous board, concrete, ceramic, aluminum, galvanized iron sheet, back of mirror (on wall only).

How to use

Crocodile Adhesive Nail is made of tough elastomeric rubber like, tackifying resin and light hydrocarbon solvent. It is very low in odour and free of aromatic solvent for use indoor and outdoor. It offers excellent bond strength, flexibility, good temperature resistance and good slump resistance. Crocodile Adhesive Nail can be used in most common construction materials. The substrates are timber, plywood, MDF, particle board, hard board, plaster board, cementitious fibrous board, concrete, ceramic, aluminum, galvanized iron sheet, back of mirror (on wall only).

Substrate Preparation
The surface must be free of dust, release agent, oil and grease. Any loose or flanking paint must remove and sanded, wiping it clean with solvent will improve adhesion.

Application
1. The surface must be dry, clean, free from dust, paint, oil stains or dirt.
2. Cut off tip of nozzle at desired bead and angle
3. Apply adhesive to surface using follow patterns :
  • In spots in order to smooth uneven surfaces or small materials
  • In stripes from for higher initial tack with wide surfaces
4. Let the adhesive dries for 5-10 seconds, then plus the substrate back firmly to ensure even contact
5. Heavy objects require supporting materials 24 hours.

Limitations
• Not suitable for PE, PP and PTFE, copper chrome arsenic preservative treated timber and any material containing copper.
• It should not be used in water immersion.
• Avoid using it on substrates that is subjected to continual temperature exposure exceeding 30°C

Caution
• May be harmful to the eyes, skin, or lungs. Wear suitable protective clothing, gloves, and eye/face protection
• In case of contact with eyes, rinse immediately with water and seek medical advice.
• After contact with skin, wash immediately with water
• Keep out of reach of children

Download