Crocodile Silicone Seal

Acetic Cure Silicone Sealant

  • General Purpose Acetic Cure Sealant.
  • Excellent adhesive strength and high elastic 570%.
  • Resistant to weathering UV radiation and cleaner
  • Adhere to glass, tiles, ceramics, aluminum, fiberglass, vinyl, metal, plastic

Standard : ASTM C661, ASTM D412, ASTM C794 ASTM C679
Color : White, Clear, Black
Packing: 
Net Weight : 280 ml.

Store Finder JORAKAY CORPORATION map

Information

Crocodile Silicone-Seal isa one part General Purpose Acetic Cure Sealant. Crocodile Silicone-Seal is a room temperature vulcanizing, acetic acid curing silicone with outstanding adhesive strength,weather ability and elasticity for general glazing and sealing application. It is ready to use, solvent-free, long shelf life, low shrinkage during vulcanization. It is suitable for sealing, bonding, repairing and mending of glass and window construction double glazing in window, shower screens, sanitary, air-conditioning, ventilators, bedding of marine hardware, etc. Crocodile Silicone-Seal exhibits an excellent adhesion to glass, tiles, ceramics, aluminum, fiberglass, non-oily woods, painted surfaces, plastic e.g. epoxies, polyester, polyacrylate and other non porous surfaces.

How to use

Crocodile Silicone-Seal isa one part General Purpose Acetic Cure Sealant. Crocodile Silicone-Seal is a room temperature vulcanizing, acetic acid curing silicone with outstanding adhesive strength,weather ability and elasticity for general glazing and sealing application. It is ready to use, solvent-free, long shelf life, low shrinkage during vulcanization. It is suitable for sealing, bonding, repairing and mending of glass and window construction double glazing in window, shower screens, sanitary, air-conditioning, ventilators, bedding of marine hardware, etc. Crocodile Silicone-Seal exhibits an excellent adhesion to glass, tiles, ceramics, aluminum, fiberglass, non-oily woods, painted surfaces, plastic e.g. epoxies, polyester, polyacrylate and other non porous surfaces.

Application Instruction
• Ensure all surfaces that will be in contact with the sealant must be clean, dry, and free of dust, dirt, rust, oil and other contaminants.
• Nonporous substrates should be clean with solvent and wipe dry immediately with cloth before the solvent evaporates from the surface. Porous surfaces should be roughening with a stiff-bristled brush, rubbed down or sandblasted.
• Cut off tip nozzle and cartridge. Screw on nozzle to cartridge.
• Fit into caulking gun; apply on surface in steady flow.
• If required, smooth and shape sealant with spatula dipped in mild detergent.
• To remove excess uncured sealant with a mineral turpentine soaked cloth. Fully cured excess sealant can be removed by trimming with a sharp knife.
• Content fully cures in 24-48 hours

Estimated Coverage
280 ml/ 2.8 m (joint width 1x1 cm)

Limitations
Can not be painted as paint will not adhere to sealant

Caution
• May be harmful to the eyes, skin, or lungs. Wear suitable protective clothing, gloves, and eye/face protection
• In case of contact with eyes, rinse immediately with water and seek medical advice.
• After contact with skin, wash immediately with water
• Keep out of reach of children

Storage
It should be kept in a dry place and the temperature is not too high to avoid product’s degradation. Use within 18 months from the date of manufacturing

Download