Crocodile Silicone Seal N Plus

100% Silicone Neutral Sanitary Sealant

Product Features

  • 100% Neutral Silicone
  • Anti mold ; contains a fungicide to inhibit the growth of mold and mildew
  • Adhere to a wide range of building materials and finishes including plastics.
  • Excellent resistance to weathering, ultra-violet adiation, moisture, ozone, temperature extreme, airborne pollutants, cleaning detergents and many solvents.
  • Non-slumping; can be used in vertical and overhead joints.

Color : White, Clear

Net Weight : 280 ml./cartridge

Crocodile Silicone Seal N Plus is a one component high performance neutral cure silicone sealant designed to resist the growth of mould and mildew where conditions of high humidity and temperature exist. It is especially suited for areas where mold is likely to be a problem such as kitchens, bathrooms, sanitary, refrigerated showcase, cold storage, refrigerated truck, bathrooms, metal sheet, skylights, ventilator system and air-conditioning units, and clean rooms because of its superior anti-mold properties. It is an easy-to-use silicone sealant designed for general purpose glazing and sealing applications where long-term reliability is required. Adhere and seal to well porous and non-porous surfaces including steel, aluminum, glass, masonry, fiberglass, non-oily wood, many plastic surface,and also for using with zinc-coated and galvanized metal building products.

Application Instruction

  • The silicone sealant should be applied at a thickness not to exceed 6 mm (1/4 in.) from an exposed edge. The recommended minimum joint dimension is 1/4"x1/4" and the maximum joint dimension is 1"x3/8".
  • Ensure all surfaces that will be in contact with the sealant must be clean, dry, and free of dust, dirt, rust, oil and other contaminants.
  • Nonporous substrates should be clean with solvent and wipe dry immediately with cloth before the solvent evaporates from the surface. Porous surfaces should be roughening with a stiff-bristled brush, rubbed down or sandblasted.
  • Cut off tip nozzle and cartridge. Screw on nozzle to cartridge.
  • Fit into caulking gun; apply on surface in steady flow.
  • If required, smooth and shape sealant with spatula dipped in mild detergent.
  • To remove excess uncured sealant with a mineral turpentine soaked cloth. Fully cured excess sealant can be removed by trimming with a sharp knife.
  • Content fully cures in 48 hours.

Estimated Coverage

280 ml/ 2.8 m (joint width 1x1 cm)

Can not be painted as paint will not adhere to sealant

• May be harmful to the eyes, skin, or lungs. Wear suitable protective clothing, gloves, and eye/face protection
• In case of contact with eyes, rinse immediately with water and seek medical advice.
• After contact with skin, wash immediately with water
• Keep out of reach of children

• Use within 16 months from the date of manufacturing

• It should be kept in a dry place and the temperature is not too high to avoid product’s degradation.