iFix by Jorakay Ready-to-Use Tile Grout

IFix by Jorakay, Ready-to-Use Tile Grout. Open and use it right away for sealing and repairing. Easy to use, no mixing, no need to scrape the old grout. It provides the perfect grouting within 4 hours.

IFix by Jorakay, Ready-to-Use Tile Grout. Open and use it right away for sealing and repairing. Easy to use, no mixing, no need to scrape the old grout. It provides the perfect grouting within 4 hours.

Installation
Preparation
Clean any dust, dirt, debris remaining in the joints. Be sure there is no water or moisture around the grouting area.

Application

• Squeeze or massage the grout tube before using
• Cut the tip of the bulb.
• Squeeze the grout into the joint line and use a rubber face trowel or finger to fill in the gap.
• Wait 15-20 minutes before cleaning off the excess grout with a damp cloth.
• The grouting area is available within 4 hours after applied. Protect the area not expose to moisture for 24 hours.

Cleaning
Possible to remove the excess grout with water before it completely cured.

Estimated Coverage
1 tube/200 ml/30 m (3 mm width, 3 mm depth)

Using restrictions

• Should be used under the temperature of 5-35°C.
• After grouting, keep it dry and away from water for 4 hours.
• Should not be used when there is high humidity as it will prevent the grout from improperly drying.
• Not suitable for swimming pools or areas with waterlogging.

Caution

• May be harmful to the eyes, skin or lungs. Wear suitable protective clothing, gloves, and eye/face protection.
• In case of any allergy, consult a doctor. After skin contact, immediately rinse with water
• Keep out of reach of children
• Should not be taken into the mouth

Storage
Keep in the shade, dry, not humid, and ventilated place (If not all used in one time, close the lid tightly). The shelf life is