Crocodile Fiber Mesh 7x7

Fiberglass reinforcing mesh

  • The e-glass mesh features finer threads, allowingwaterproofing agents to seep through easily withouthardening up.
  • The mesh is easy to install, does not crease or wrinkle,and can be used with both flooring and walls.
  • The mesh can withstand over 490 N/kgF of tensile forcefrom both directions.
  • The wide gaps between threads allow reinforcing materialsto seep through to other layers.

Application

  • Reinforcing corners, edges, or areas prone to cracksalong with flexible waterproofing products such as Crocodile Flex Shield, Crocodile Flex 2K, or Crocodile Roof Shield
  • Enhancing strength and resistance to abrasion on thesurface such as during the application of CrocodileRoof Shield on a roof
  • Reinforcing corners, edges, or areas prone to cracks orupon repairing cracks on a concrete surface with mortar
  • Reinforcing joints between two different materials to reducepotential cracks
  • Reinforcing joints between gypsum boards and fiber cement boards, in tandem with other sealants such as gypsum or a thin coat of finishing polymer

Packing : 
Dimensions: 1.0 meter wide x 100 meters long (1 roll/box)
0.2 meters wide x 10 meters long (40 rolls/box)

Store Finder JORAKAY CORPORATION map

Information

Fiberglass reinforcing mesh This high quality fiberglass mesh is manufactured with fiberglass threads coated with waterproof polymers and is used to enhance tensile strength in waterproofing systems, prevent tears that may result from movement along the joints of a structure, and improve resistance to friction on the surface of a waterproofing product.

Recommendations
The mesh should be installed on the surface while the waterproofing agent is still wet and apply an additional coat to thoroughly cover the fiber. The edges of adjacent sheets of the fiberglass mesh should overlap by at least 5-10 cm.

Caution

  • Product may cause injury to skin or eyes. Use of rubber gloves, dust masks, eye protection, and other safety equipment is recommended
  • If contact with eyes occurs, flush immediately and repeatedly with water, and then contact doctor immediately
  • Avoid contact with skin. Wash thoroughly after handling
  • Keep out of reach of children

How to use

Fiberglass reinforcing mesh This high quality fiberglass mesh is manufactured with fiberglass threads coated with waterproof polymers and is used to enhance tensile strength in waterproofing systems, prevent tears that may result from movement along the joints of a structure, and improve resistance to friction on the surface of a waterproofing product.

 

Download