Crocodile Acrylic Bondcrete

Substrate Preparation

Remove all loose, unsound, or contaminated concrete from area to be repaired. Roughen concrete surface. Pre-wet concrete and allow surface to dry before applying Crocodile Acrylic Boncrete.

Application

Use as an Admixture

Crocodile Acrylic Bondcrete can be used for patching applications. Mix Crocodile Acrylic Bondcrete 1 liter with water 2 liters and portland cement 5 kg and sand 13 kg

Use as a Bonding Agent

• For Slurry Bond Coat: Mix Crocodile Acrylic Bondcrete 1 part with portland cement 1.5 parts is suggested to provide a creamy thick bonding slurry. Apply by brush or broom

• For Neat Bond Coat: Apply by brush or roller on the concrete. Wait until the bonding film is clear and dry to the touch before applying mortar or concrete

Usage Ratio
• For Cement Mixing Crocodile Acrylic Bondcrete 7.5 liters per 50 kg of cement
• For Priming Crocodile Acrylic Bondcrete 1 liter per 3 sq.m

Limitation            

• Do not use as a neat bonding agent for any vertical, overhead, or structural applications, or with rapid setting cementitious products.
• The minimum recommended application temperature is 10°c. Temperature must remain at least 24 hours.

Caution 

• Admixture may cause injury to skin or eyes. Use of rubber gloves, dust masks, eye protection, and other safety equipment is recommended.
• If contact with eyes occurs, flush immediately and repeatedly with water, and then contact doctor immediately.
• Avoid contact with skin. Wash thoroughly after handling.
• Keep out of reach of children

Storage 

• It should be kept in a dry place and the temperature is not too high to avoid product’s degradation.
• Shelf life for 1 year since manufactured date.