Crocodile Ecoshield

Crocodile Ecoshield Polymer Modified Crocodile Ecoshield is a waterproofing cement coating with one component. It can adhere to practically surface such as concrete, mortar plasters, bricks, concrete blocks pre-fabricated panels, etc.

Crocodile Ecoshield Polymer Modified Crocodile Ecoshield is a waterproofing cement coating with one component. It can adhere to practically surface such as concrete, mortar plasters, bricks, concrete blocks pre-fabricated panels, etc.

Substrate Preparation

• Clean the surface to be free from dust, grease, concrete scrap or unknown matter etc.
• Fill cracks if any on the surface with suitable repairing material. Fill wall border or joints with sealant.
• Leave the surface dry at least 3 hours after cleaning.
• The concrete surface must be damp.

Mixing Ratio
Cement 20 kg : water 6.6 liters or
Cement 2.2-2.5 parts : water 1 part (by volume)

Mixing

• Add Crocodile Eco shield to the water and mix until smooth or use the drill 150 rpm
• Prepare only as much as can be applied within 30 minutes. Do not add water.

Application

1. Apply with brush when a smooth finish is required.
2. The second coat should be applied, allowing 30-90 minutes apart between each application.
3. The surface should be left to dry at least 3 days.
4. Tile work should be done on surface after 3 days.

Estimated Coverage
1-1.5 kg / sq.m./ 2 coats

Limitations

• Do not left expose.
• Do not apply in areas of high water pressure >0.5 bar
• It’s not recommended for use epoxy glue to fix on the membrane.

Caution

• Cement may cause injury to skin or eyes. Use of rubber gloves, dust masks, eye protection, and other safety equipment is recommended.
• If contact with eyes occurs, flush immediately and repeatedly with water, and then contact doctor immediately.
• Avoid contact with skin. Wash thoroughly after handling.
• Keep out of reach of children

Storage
It should be kept in a dry place and the temperature is not too high to avoid product’s degradation. Age of product is 1 year.