Crocodile A100

Water repellent clear coating

  • High gloss and water repellent for mineral substrate
  • Suitable for both exteriors and interiors

Color : Clear, transparent and gloss
Package : 3.785 liters



Crocodile A100, Water repellent clear coating. It is produced from 100% Acrylic Resin. For apply to enhance gloss, protect water and dirt on concrete, natural stone, granite, brick and other mineral substrate. Enhance new look of substrate and easy to care. It Suitable for both exteriors and interiors. It can work without dilute solvent.

How to use

Application Instruction

Substrate Preparation
The substrate must be dry, clean, no dirt, no dust, without any oils and other impurity. If the substrate present algae, mold and fungi, it is recommended to do a thorough cleaning, eliminating in its entirety and with specific products for this propose. If the substrate present non absorption, it is recommended to soft polish by sand paper.

Apply 2-3 coats Let the film dry 25-30 minutes between layers. Full cure approximately 12 hours.

Estimated Coverage
30-35 m2 / liter / coat. It depends on the type and condition of the substrate. The exact consumption must be determined by the means of a sampling of the work..

1. Apply by brush or roller
2. Air gun

Tool cleaning
Clean tools after use with White Spirit Solvent or Thinner AAA.

• In case apply under sunlight or high temperature area. User can adjust viscosity of the product by dilute 5-10% of Thinner AAA. Should test the product properties before use.
• In case apply on new cement substrate. It must be left to dry at least 28 days.
• Do not apply on surfaces in constant contact with water or moisture.
• In case of rain, let the substrate dry before applying.

• Recommend to use rubber glove, dust masks, eye glass and personal safety equipment.
• Apply with good ventilation. Do not inhale product.
• In case of contact with eyes, rinse immediately with water and seek medical advice.
• Keep away from children.